The cool blog 6475

Termites do not just chew wood, they erase load paths. A stud with a hidden groove in its center stops doing its job. A sill plate reduced to balsa lets the whole wall slump a hair, which telegraphs as cracks, sticky doors, and creaks you feel before you see. Repairing that damage is part detective work, part structural carpentry, and part code compliance. If you want the fix to last, and to pass inspection, the details matter. I have opened up hundreds of termite-damage

Moisture tells two stories in a house. In the attic, it condenses on cold roof sheathing and feeds mold. In the crawlspace and walls, it invites subterranean termites to dine on framing that looked solid last year. Over and over, I see one quiet defect upstream of both problems: poor airflow at the eaves because there are no attic vent baffles, or the baffles that exist are crushed or missing in key bays. When baffles fail, insulation slumps into soffit vents, air stops mov

If your floor has started to feel springy, spongy, or oddly noisy, you might be feeling the kind of dread that only a homeowner with termite damage understands. Subfloors carry the loads you do not see, and when termites hollow out the wood beneath, the damage stays hidden until the structure loses stiffness. I have opened up kitchens where the vinyl looked perfect, yet a screwdriver slid through the subfloor like it was cake. The owners swore it felt fine last season. Term

Termites love what sill plates provide: low, hidden, and often damp wood that touches concrete. When that band of lumber rots from the inside out, the house starts speaking in subtle ways. Doors rub, baseboards open small gaps, floors feel springy along exterior walls. Ignore it and the problem grows teeth. Address it with a plan and some skill, and you can reset the structure for decades. I have replaced sill plates all the way around houses that were still occupie